ESL-2600 Ezer Slit Lamp
click to see larger image

ESL-2600 Ezer Slit Lamp

ESL-2600 Ezer Slit Lamp
click to see larger image
ESL-2600 Ezer Slit Lamp
click to see larger image
ESL-2600 Ezer Slit Lamp
click to see larger image
ESL-2600 Ezer Slit Lamp
click to see larger image


ESL-2600 Ezer Slit Lamp

The ESL-2600 Slit Lamp presents a stereoscopic optical system by adding fusing images a focal point.
The ESL-2600 brings a two position lever that is located under the optical head that makes it easy to interchange the magnification levels.
A pair of eyepieces are optional in order to change the magnification levels in cases where increased magnification is essential.
The ESL-2600 Slit Lamp is capable of magnifications of 10x and 16x.
slit lamps sl-880

Incline it to move the instrument slightly on the horizontal surface and rotate it to adjust the elevation of the microscope.

Slit width control knob
The slit width is adjustable from 0 to 9 mm.

Aperture and slit height control knob
Rotate this knob to adjust the spot and slit height. Swing the knob horizontally to revolve the slit.

Brightness control switch
Two levels are available -H (High), N (Normal). Continuos working at high setting must be avoived, as the service life if the bulb will be shortened.

▪ Horizontal mark
When the horizontal center of the patient's eye is aligned with this mark, the elevation of the microscope. Controlled by joystick is also on its center position.
▪ There are four filters for selection
Heat-absorption, grey, red-free and blue.
▪ Slit height and aperture display window.
▪ Lamp cap
▪ Chin-rest elevation adjustment knob
Rotate the knob to adjust the elevation of the chin-rest.
▪ Protection cap
▪ Microscope and illumination arm couple bolt
Fasten this bolt and the illumination arm and the microscope arm can be Rotated together.


Type Cross-Angle stereovision
Model magnifying Change the objective for 2 grade magnification
Eyepiece 10x
Total magnification rate
1x      10x
Objective x Eyepiece = magnification rate / vision field
10x      ø18mm/0.7in
1.6x      16x 16x      ø14.5mm/0.57in
Range of P.D. adjustment 10x eyepiece 55mm/2.16in to 82mm/3.23in
Diopter Adjustment 10x eyepiece ±6D
Slit projection magnification 2/3x
Slit width continuous from 0mm/0in to 9mm/0.35in
(at 9mm/0.39in, slit becomes a circle)
Slit height continuous from 1mm/0.039in to 8mm/0.315in
Aperture diameter ø9mm,ø8mm,ø5mm,ø3mm,ø2mm,ø1mm,ø0.2mm
Slit angle 0º to 180º with horizontal scanning capability
Filter piece heat-absorption, grey, red-free and blue
Illumination bulb 12V30W halogen bulb
Movement base
Fore and back movement 90mm/3.54in
Left and right movement 100mm/3.93
Fine movement 15mm/0.59in
Vertical movement 30mm/1.18in
Chin-rest parts
Vertical movement 80mm/3.15
Fixation target Red-LED
Power Source
Input voltage 100/220V ~ ±10%
Input frequency 50/60 Hz
Input power 58VA
Output voltage Illumination bulb 9.9V, 11.6V
Fixation target 7.2V
Electric safe standard Conform to Standard IEC601 - 1, Class I Type B
Dimension and weight
Packing box 670 x 570 x 510mm / 26.37 x 22.44 x 20in
Total weight 23 Kg / 50.6 Lb
Net weight: 20 Kg / 44 Lb
Fixation target
An illuminated fixed spot for the patient to look at.

Base Locking Screw
The base will be locked when this screw is fastened.

Position Lever
The two position lever located under the optical head, makes it easy to interchange the magnification levels.

Optional Accessories
(Additional purchase)

Applanation tonometer
This ESL-2600 slit lamp can be equipped with TN-150, Model R-900 or Model T-900 applanation tonometer to measure the intraocular pressure.
slit lamps sl-880