ESL-5200 Ezer Slit Lamp
click to see larger image

ESL-5200 Ezer Slit Lamp

ESL-5200 Ezer Slit Lamp
click to see larger image
ESL-5200 Ezer Slit Lamp
click to see larger image
ESL-5200 Ezer Slit Lamp
click to see larger image


ESL-5200 Ezer Slit Lamp

The ESL-5200 Slit Lamp presents a stereoscopic optical system by adding fusing images a focal point.
The ESL-5200 brings a two position lever that is located under the optical head that makes it easy to interchange the magnification levels.
A pair of eyepieces are optional in order to change the magnification levels in cases where increased maginification is essential.
The ESL-5200 Slit Lamp is capable of magnifications of 10x and 16x with the 10x eyepiece and 16x, 25x with the 16x eyepiece.
slit lamps esl-5200

Brightness control switch
Three levels are available -H (High), N (Normal), L (Low). Continuos working at high setting must be avoived, as the service life if the bulb will be shortened.

Hruby lens kit standard
Accessory drawer
Use it to store the focusing test rod and the other accesories.

Base Locking Screw
The base will be locked when this screw is fastened.

Aperture and slit height control knob
Rotate this knob to adjust the spot and slit heighgt. Swing the knob horizontally to revolve the slit.

Single-handed elevation Joystick
Incline it to move the instrument slightly on a horizontal surface and rotate it to adjust the elevation of the microscope.

Pencil-point fixation light
An illuminated fixed spot for the patient's to look at.

• Horizontal mark
When the horizontal center of the patient's eye is aligned with this mark, the elevation of the microscope. Controled by joystick is also on its center position.
• There are four folters for selection
Heat-absorption, grey, red-free and blue.
• Slit height and aperture display window.
• Lamp cap
• Chin-rest elevation adjustment knob
Rotate the knob to adjust the elevation of the chin-rest.
• Protection cap
• Microscope and illumination arm couple bolt
Fasten this bolt and the illumination arm and the microscope arm can be Rotated together.
Optional accesories
(Additional purchase)

10x measuring eyepiece
Replace the common eyepiece with this to measure the length and angle.
Scale specification
Length scale: 116mm/0.63in (0.5mm/0.019in minimum graduations)
Angle scale: 360° (5° minimum graduations)
Measuring parameters
Length scale: To be used at 10x only
Diopter compensation: -5D to + 3D
Angle scale: No limitation

slit lamps sl-1100

Applanation tonometer
This ESL-5200 slit lamp can be equipped with TN-150, Model R-900 or Model T-900 applanation tonometer to measure the intracular pressure.

slit lamps esl-5200


Type Cross-Angle stereovision
Model magnifying Change the objective for 2 grade magnification
Eyepiece 10x
Total magnification rate
1x      10x
Objective x Eyepiece = magnification rate / vision field
10x      ø18mm/0.7in
1.6x      16x 16x      ø14.5mm/0.57in
Range of P.D. adjustment 10x eyepiece 55mm/2.16in to 82mm/3.23in
Diopter Adjustment 10x eyepiece ±6D
Slit projection magnification 2/3x
Slit width continuous from 0mm/0in to 9mm/0.35in
(at 9mm/0.39in, slit becomes a circle)
Slit height continuous from 1mm/0.039in to 8mm/0.315in
Aperture diameter ø9mm,ø8mm,ø5mm,ø3mm,ø2mm,ø1mm,ø0.2mm
Slit angle 0º to 180º with horizontal scanning capability
Slit inclination 5º,10º,15º,20º four steps
Filter piece heat-absorption, grey, red-free and blue
Illumination bulb 12V30W halogen bulb
Movement base
Fore and back movement 90mm/3.54in
Left and right movement 100mm/3.93
Fine movement 15mm/0.59in
Vertical movement 30mm/1.18in
Chin-rest parts
Vertical movement 80mm/3.15
Fixation target Red-LED
Power Source
Input voltage 100/220V ~ ±10%
Input frequency 50/60 Hz
Input power 58VA
Output voltage Illumination bulb 9.9V, 11.6V
Fixation target 7.2V
Electric safe standard Conform to Standard IEC601 - 1, Class I Type B
Dimension and weight
Packing box 670 x 570 x 510mm / 26.37 x 22.44 x 20in
Total weight 23 Kg / 50.6 Lb
Net weight: 20 Kg / 44 Lb